Talc Powder Application:

Talc is a kind of quite soft stone, which is not easy to process. The talc powder is used in many industries such as refractory materials, paper making, filler of rubber, insulating materials, lubricant, pesticide absorber, leather paints, cosmetic material and carving materials, ceramics industry, etc.

How to Make Talc Powder?

To making Talc powder, the application has a strict request on the powder whiteness and the fineness usually need more than 600 mesh. According to our customers' feedback, we recommand you use our HGM Series Ultra Fine Grinding Mill, which fineness can adjust from 30-2500 mesh, is designed and manufactured based on our advanced design idea, in combination with the European technology and the market demand.

Features and advantages of Talc grinding mill:

1.High fineness, flexible adjustment.

The final fineness of calcium carbonate ulra fine grinding mill can be adjusted between 325 meshes and 2500 mesh (47-5 micron), and the product fineness can reach D97≤5μm

2.High Efficiency.

Under the same finished final size and the same motor power, the capacity of calcium carbonate ulra fine grinding mill is twice as much as jet mill, mixing grinder and ball mill, and energy consumption decreased 30%.

3.Long lifecycle of spare parts.

The ring and roller are forged by special material with high utilization,the lifetime can reach 2-5 years for grinding calcium carbonate.

4.High safety and reliability.

As no rolling bearings or screws in grinding cavity, there are no problems caused by bolts shedding or rapid wear of bearings and seal components.

5.Environment-friendly. There are sound-proof house and muffler to reduce noise, dust cleaner to avoid dust flying outsize. 

Talc Grinding Mill Working Flow:

Whole grinding line: crusher(hammer or jaw crusher or others) + elevator + hopper + feeder +  main unit grinder + cyclone power collector + pulve bag dust cleaner + blower + muffler + sound-proof house

Stage 1. Talc are transported into crusher by truck and crushed into small particle size, and then lifted into storage silo of main machine by bucket elevator.

Stage 2. Talc comes from hopper and feed into main mill uniformly by vibrating feeder, then goes into pipes.

Stage 3. In the grinding process, qualified final product after screening system will go into powder collector, and then go out from outlet. Unqualified product will go back to main mill and regrind until it get the needed size.

Stage 4. The air flow after purification will go into fan from pipes that up the bag filter

You are alwyas warmly welcomed to contact or visit us .Our engineers will design the most suitable solution for your project.

Any needs or questions, please leave a message or chat with our one line service now!