300-2500 Mesh Micro Powder Grinding Mill 2019-05-10

Introduction of Micro Powder Grinding Mill

Name: Micro Powder Grinding Mill
Model: HGM
Brand: Clirik
Capacity: 0.5-45 tons per hour
Finish Powder Fineness: Could be adjusted between 300 mesh to 2500 mesh
Application: the micro powder grinding mill can be used in more than 200 kinds of micro powder grinding, such as: carbon black, carbon black, coconut shell, dolomite, gypsum, marble, mica, cement and so on.

Working Principle of Micro Powder Grinding Mill

After crushed by hammer crusher, the large materials become small ones and are sent to storage hopper by elevator, and then evenly sent to the upper distribution plate of the turn plate by vibrating feeder and sloping feeding pipe. When the micro powder grinding mill is at work, the main bearing and each dial are driven by electronic motor through reducer, and all the grinding rollers are rolling in the ring channels driving by dial through plunger. The materials are driven to the edge of the turn plate by the centrifugal force and fall down into the grinding chambers.

The high-pressure air blower constantly inhales air, airflow with crushed materials are brought to classifier whose high-speed impeller will screen the airflow: The unqualified particle size will fall and return to the micro powder grinding mill for being reground while the qualified particle size mixed with air will go into the cyclone powder collector. Most of the qualified powders will fall and exit from the discharging valve at the bottom; A small proportion of the fine powders, with airflow, moves to the dust cleaner. The materials from the above two lots are sent by the conveyor to get finished powders packed. In addition, filtered clean air will be emitted from muffler in the end.

Company Information of Micro Powder Grinding Mill

Manufacturer: Shanghai Clirik Machinery Co. Ltd.
Address: China Shanghai PuDong New Area HeQing Town FuQing Road No.1
Company Email: sales@clirik.com
Website: http://www.shclirik.com