Four Crushing Equipment From Shanghai Clirik 2017-04-14

There are mainly four types crushing equipment in the mining machines. And shanghai Clirik could supply all of these four types crushing equipment for our customers. And then, I would tell you what types of crushing equipment we could supply for you.

JAW CRUSHER

When the motor drive belt and pulley, the eccentric shaft causes the movable jaw movement, when the movable jaw rises elbow plate and the movable jaw angle becomes larger, thus pushing the movable jaw plate close to fixed jaw plate at the same time, the material is extruded, rubbing, grinding and other multiple broken; when the movable jaw, elbow plate and the movable jaw angle becomes small, the movable jaw plate leaves the fixed jaw plate in the bar under the action of the spring, has been crushing the material under the action of gravity, the lower jaw cavity outlet free discharge. Therefore, the work of jaw crusher is intermittent, crushing and unloading process in the jaw cavity alternately. With the continuous rotation of the motor, the motor jaw is periodically crushed and discharged to achieve mass production.

CONE CRUSHER

When the utility model works, the motor drives the belt pulley or the coupling to rotate, and the horizontal cone, the eccentric sleeve and the hanging vertical shaft force the moving cone to rotate along the inner surface of the fixed cone. In the moving cone toward the fixed cone section, moving cone material by extrusion, impact and bending and crushing, crushing cavity; the type of deviation from the fixed cone place has been broken in the material under the action of gravity from the cone bottom unloading. The continuous crushing of stone by the continuous work.

IMPACT CRUSHER

When working, the motor drives, the high-speed rotation of the rotor, the material into the plate hammer function area, and the impact of the rotor plate hammer broken, and then thrown to the back device broken again, other ore ore and then bounce back plate behind the plate hammer or rotor thrown collide with each other, so the ore at the first crushing cavity subjected to repeated impact shattered. Some ore crushing in the first crushing chamber to a certain size, the gap between the back plate and rotor and crushing chamber row to second, continue to be repeatedly hit, until it reaches the ideal size only by the crusher at the bottom of the discharge port of discharge.

HAMMER CRUSHER

In the work, the letter has a heavy hammer crusher is directly to the largest particle size of 600-1800mm material broken to 25 or 25mm below a broken crusher. Hammer crusher is suitable for crushing medium hardness in cement, chemical industry, electric power, metallurgy and other industrial sectors of materials, such as limestone, slag, coke, coal and other materials crushing, fine crushing.